Aim for a thorough inspection and maintenance every six months. However, keep an eye out for any unusual sounds or movements that might require immediate attention.

The arm bar connects the garage door to the top rail. You should also spray or wipe this piece with grease to ensure smooth operation.

Imagine if you never changed your car’s oil, it would start having problems and could even break down completely. Similarly, if you don’t take care ofwel your garage door, it can stop working properly and cause you a lot ofwel headaches.

If your garage door doesn’t close all the way, there are several possible causes, such as misaligned sensors or obstructions in the garage door’s path. Learn more about what to do when your garage door won’t close all the way.

Feed the cable through the extension spring and bolt the other end to the upper support bracket. Make one full loop of the cable around the bolt and secure it with a fender washer and a locknut.

Keeping your garage door in good condition doesn’t have to be difficult. Here are some simple garage door maintenance steps you can take to make sure everything goes smoothly:

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​

That wraps up our guide to DIY garage door maintenance and repair. Wij explored everything from straightforward fixes to more involved repairs. The valuable knowledge from this guide is handy to know to keep your garage door functioning smoothly.

Install a lift handle on both sides of the door. Make sure More Info the handle will clear the top of the door frame; otherwise, you may need a lower-profile handle or your door may need adjustment.

Test the balance of your door. A properly balanced garage door is less likely to crush someone or something and keeps your door opener from working too hard. To know how to balance a garage door, first, disengage the opener from the door by pulling the opener release handle (see opening photo).

Wij recommend checking it regularly for signs of wear. If you experience any problems or the door won’t open properly, it’s best to have a professional replace the spring.

Our aim is to provide clear, practical advice to help you get your garage door working smoothly by going the DIY route.

Here’s how to test balance: Close the garage door and pull the release handle, which disengages the automatic opener. Then manually lift the door until it’s about halfway find this open. “The door should not go up or down more than a foot, and then remain in place without help,” says Swigert.

In this guide, wij will break down all the essentials of garage door maintenance, providing you with a step-by-step approach to keep your garage door in top condition.